Playback; Basic Playback Operation; Playing Back A Movie; Slide Show - Casio QV-3000EX/Ir User Manual

Screen Save Using Zoom
The following describes the different techniques that you can
Video Out Displaying Nine Images Using the PLAY Menus

Playing Back a Movie

Panorama Playback This item can be used to specify the format of
use to playback recorded images.
the video output signal.
BASIC
Slide Show automatically scrolls through the images stored The following operation lets you simultaneously view nine Use the following operation to playback panoramas re- Use the following operation to play back a movie that was The PLAY menus provide you with control over the display The following operation lets you magnify an image to twice The screen saver function automatically activates Slide
NTSC : Video format in the United States
format and DPOF settings, image delete and save opera- Show (which automatically scrolls through images) images on the same screen. This capability is especially and a half its normal size. Note that you can zoom only a corded using the operation under "Panorama Recording" on recorded using the operation under "Movie Recording" on in memory. You can also specify how much time should be

Basic Playback Operation

PAL
tions, and other settings. Each PLAY menu has two formats: whenever you do not perform any operation for about five allowed between each image. single still image. page E-64. page E-62. useful when playing back to the screen of a connected TV,
and can be used to display a catalog of products, etc. a basic menu and an advanced menu. Press DISP to toggle minutes in the PLAY Mode. This protects the camera's
The built-in monitor screen of the camera lets you play back
between the basic menu and advanced menu. monitor screen and the screen of a connected TV against
1. 1.
recorded images without connecting an external monitor. Align the POWER/Function Switch with PLAY. Align the POWER/Function Switch with PLAY. Language This setting lets you select either English or
IMPORTANT!
IMPORTANT!
"burn in" of a static image that is left displayed too long.
1.
Japanese as the display language.
BASIC
Movie and panorama images cannot be zoomed.
2. 2.
Use [ ] and [ ] to select the movie you want to Use [ ] and [ ] to select the panorama you
PLAY Menus
Align the POW
1.
Align the POWER/Func-
Beep Use this item to turn the key input confirmation
2.
IMPORTANT!
want to play back. play back.
tone off and on.
tion Switch with PLAY. BASIC
See "Menu Screens" on page E-31 for information about
Zoom
Press MENU.
• The screen saver is enabled only when the camera is
how to use menus.
3.
Select Deletes a single specific image.
being powered by its optional AC adaptor. If you do
Basic menu items are indicated by
Auto Power Off (page E-41) is disabled whenever Slide BASIC
Select Ò9 Mult
not perform any operation for five minutes under bat-
Show is being used. This means you should not leave
tery power, camera power automatically turns off
Folder Deletes all unprotected images in a specific
Enlarges the image on the monitor screen.
Slide Show running when using batteries to power the
(Auto Power Off).
folder.
BASIC
BASIC
2.
camera. Doing so can rundown batteries. Be sure to
Use [ ] and [ ] to scroll through the images
• The screen saver displays protected images only. The
1.
Align the POWER/Function Switch with PLAY.
stop Slide Show and turn off the camera after you are
screen saver is disabled if there are no protected im-
stored in camera memory.
All Deletes all unprotected images.
9 Multi Displays nine images on the monitor screen.
finished.
ages in memory.
BASIC
BASIC
• Press [ ] to scroll forward and [ ] to scroll back. Hold-
2.
Use [ ] and [ ] to select the image you want to
• Photo Loader will not send images between the cam-
• On the advanced menu, select "View" ing down either button scrolls at high speed.
zoom.

Slide Show

era and a personal computer while the screen saver is Automatically scrolls through the images one-
• The first image of the set is the image that was on the
by-one.
BASIC
turned on. Make sure you turn off the screen saver
3. 3.
Press SET to start panorama playback. Press SET to start playing back the movie.
screen when you performed step 2 of this operation.
3.
Press MENU.
before trying to perform any image transfer operation.
The other images are those that sequentially follow
Note that the screen saver is turned on when you pur-
• You can use [ ] (forward) and [ ] (reverse) while • You can change the direction of a panorama that is
the first one.
4.
Select "Zoom". chase the camera.
playing back by pressing [ ] or [ ]. playing back a movie to change the playback direc-
tion.
• On the advanced menu, select "View"
Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com
Slide Show
and Japan
: Video format in Europe and other
areas
BASIC .
REC
OFF
"9 Multi".
"Zoom".

PLAYBACK

PLAYBACK
1. 4. 5. 1.
NOTE Align the POWER/Function Switch with PLAY. Use [ ] and [ ] to scroll through images • Pressing DISP changes to a small-image display. Specify the area. Align the POWER/Function Switch with PLAY. • To enlarge the movie image so it fills the entire moni-
Protect
tor screen, press DISP. Pressing the DISP again re- Press DISP again to return to the full-screen size.
stored in memory.
The image that initially appears on the monitor screen
• The portion of the selected area appears on the dis-
2. 2.
Press MENU. Press MENU. turns the image to its original small size.
• Pressing SET during panorama play pauses play- in the PLAY mode is a preview image. The full of
play at twice and a half its normal size.
• To view a particular image in normal size, press DISP.
• Pressing SET during movie play pauses playback. image appears after three seconds. Images copied back. Press SET again to resume playback.
This causes the
• Use [ ] and [ ] to move the area selection frame left
3. 3.
Select "Tools" Select "Slide Show".
from another digital camera or a computer may take Press SET again to resume playback.
corner of the monitor screen. To produce an enlarged
• While panorama playback is paused, you can use [ ]
and right. Use [ ] and [ ] to move it up and down.
longer time to appear.
• On the advanced menu, select "View" • "Tools" appears on the advanced menu only.
• While movie playback is paused, you can use [ ] (for- view of an image, use [ ] and [ ] to move the (forward) and [ ] (reverse) to move frame-by-frame
DPOF
6.
mark to the image you want and then press SET.
BASIC ward) and [ ] (reverse) to move frame-by-frame through the panorama.
To return the image to its normal size, press
• To turn off the screen saver, perform the above proce-
4.
To stop Slide Show, press any button besides
through the movie.
any button besides [ ], [ ], [ ], [ ]. dure and select "Off".
4.
MENU.
Press MENU to stop panorama playback.
• The screen saver activates if you do not perform any
1
4.
After the movie is complete, press MENU.
• Pressing MENU while a Slide Show is in progress
operation for about five minutes in the PLAY Mode.
4
displays a screen that lets you change the interval
Screen
• Press any key to exit the screen saver.
7
Saver
within the range of 3 to 30 seconds.
• When changing between images, the screen saver
PLAY
• Note that all buttons are disabled while an image
Card
uses the interval that is specified for Slide Show (page
change is in progress. Wait until an image is stopped
5.
After you are finished, press any button be-
Browser
E-83).
on the monitor screen before performing a button
BASIC
sides [ ], [ ], or DISP to return to the normal
operation, or hold down the button until the image
single-image display.
Format
stops.
BASIC
• Images copied from another digital camera or a
computer may take longer time to appear.
Date
BASIC
E-78
Use this item to protect images against deletion.
Select : Protects a single specific image.
Folder : Protects all images in a specific
folder.
mark to appear in the upper left
All : Protects all images.

"Screen Saver"

Use this item to specify images for printing on
a DPOF printer.
Select : Prints a single specific image.
All : Prints a specific number of copies
2 3 10 11 12
of all images.
5 6 13 14 15
This item turns the screen save off and on.
8 9 16 17 18
Use this item to select the card browser file
type.
Off/ Type1 / Type2 / Type3 / Type4
Select this item to format a memory card.
Use this item to specify the format of the date
that appears in the monitor screen, and to
adjust the date setting.
Style(Year/Month/Day / Day/Month/Year /
Month/Day/Year) / Adjust
"On".
"Slide Show".
19 20 21
22 23 24
25 26 27