System Requirements - Casio QV-3000EX/Ir User Manual

Windows 95, 9
Connecting to a Computer
The Data Transfer Cable can be connected to an IBM PC/AT
The following accessories are included with the camera to
or compatible that is equipped with a D-Sub9 RS-232C ter-
make it easy for you to connect to a computer to transfer and
minal.
manage your images.
• USB cable
RS-232C terminal
• USB driver software (on CD-ROM)
(D-Sub 9-pin)
• Data Transfer Cable
• Photo Loader application (on CD-ROM)
USB Port Connections
The camera's USB port and accessories make it easy to
connect to a computer equipped with a USB port. First install
the USB driver software that comes bundled with the camera
on your computer, and then use its special USB cable to
Macintosh
make the connection. Once connected, you can view images
Connection of the Data Transfer Cable and operation of the
on your computer's display and store images on its hard
Photo Loader application is not supported on an Apple
disk.
Macintosh.
• See the separate installation manual for information about
how to install the driver software on your computer.
Downloaded From camera-usermanual.com Downloaded From camera-usermanual.com
CONNECTING TO OTHER EQUIPMENT
Data Transfer
Cable
DIGITAL terminal
E-100
IMPORTANT!

System Requirements

• See the documentation that comes with Photo Loader
for information about system requirements. Windows
• Be sure to turn off the camera, computer, and all pe-
• IBM PC/AT or compatible
ripherals (monitor, disk driver, etc.) connected to the
computer pre-installed with
computer before connecting the digital camera with
windows 2000 or Windows 98,
the Data Transfer Cable.
or pre-installed with Windows
98 and upgraded to Windows
• After connecting the camera to the computer, align the
2000
POWER/Function switch with PLAY and then turn on
• 486 or higher CPU (Pentium
the computer. Note that data communication with a
recommended)
computer is not possible while the POWER/Function
• CD-ROM drive (for installa-
switch is in the REC position.
tion)
• Never connect or disconnect the cable while Photo
• Keyboard and mouse or
Loader is running. Doing so can cause problems with
equivalent input device
program execution, can corrupt data, and can damage
• Available USB port
the camera and your computer.
* Proper operation is not guaranteed
• Data transfer while camera batteries are low can re-
under the following conditions.
sult in sudden shutdown of the camera. Because of
• A computer upgraded from
Windows 95 or Windows 3.1 to
this, use of the optional AC adaptor is recommended
Windows 98
whenever performing data communication with the
• A computer upgraded from
Windows 95 or Windows NT to camera.
Windows 2000
• This camera does not support data communication
* This USB driver does not run un-
with any of the optionally available CASIO PC link
der Windows 3.1, Windows 95 or
Windows NT.
software applications: LK-1, LK-1A, LK-10V, LK-11W,
* In the case of Windows 2000,
LK-2, LK-2A, LK-2V, LK-21.
proper operation is guaranteed for
Windows 2000 Professional only.
* The USB driver may not run correctly under certain hard-
ware configurations.
Macintosh
• Mac OS 8.5 or higher, Mac
OS 8.1 with USB system
extentions (iMac Update 1.0
is required)
• Power PC G3
• CD-ROM drive (for installa-
tion)
• Keyboard and mouse or
equivalent input device
• Available USB port