JVC KD-G511 Service Manual page 8

QQ
3.1.3 Removing the front chassis assembly 3 7 63 1515 0
(See Figs.3 and 4)
• Prior to performing the following procedures, remove the front
panel assembly and bottom cover.
(1) Remove the two screws A on the both sides of the main
body. (See Fig.3)
(2) Remove the two screws B on the front side of the main
body. (See Fig.4)
(3) Release the two joints d and two joints e on the both sides
of the main body, then remove the front chassis assembly
forward. (See Fig.3)
TE
L 13942296513
3.1.4 Removing the side panel
(See Fig.5)
Reference:
Remove the front panel assembly as required. (Refer to "3.1.1
Removing front panel assembly")
(1) Remove the two screws C and screw D attaching the side
panel on the left side of the main body.
(2) Take out the side panel from the main body.
3.1.5 Removing the rear bracket
(See Fig.6)
• Prior to performing the following procedure, remove the bottom
cover.
(1) Remove the four screws E, one screw F and three screws
G attaching the rear bracket on the back side of the main
body.
(2) Take out the rear bracket.
Reference:
www
When attaching the rear bracket to the main body, insert the
steering remote into the slot of the rear bracket.
.
1-8 (No.MA138)
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Joint d
A
Joint d
Front chassis assembly
B
Q Q
3 6 7 1 3 1 5
C D
Side panel
Rear bracket
co
E
.
9 4 2 8
Joint e
A
Joint e
Fig.3
Front chassis assembly
Fig.4
0 5 8 2 9 9 4 2 8
C
Fig.5
G F G
m
E
Fig.6
9 9
9 9