Facsimile Specifications - Sharp MX-5500N Safety Manual

SPECIFICATIONS

Facsimile specifications

Model
Applicable telephone line
Scanning resolution
(supports ITU-T
standards)
Transmission speed
Compression method
Transmission modes
Input document size
Paper sizes
1
Transmission time *
Power supply
Dimensions
Weight
Remarks
*1 Transmission speed is for an A4 or 8-1/2" x 11" document with approximately 700 characters at standard resolution (8 x 3.85
lines/mm) sent in high speed mode (33.6 kbps (JBIG) or 14.4 kbps). This is only the time required to transmit the image
information; the time required to send protocol signals is not included. Actual transmission times will vary depending on the
contents of the document, the receiving machine type, and telephone line conditions.
*2 Total number of all destinations (Scan to E-mail, Scan to FTP, Scan to Desktop, Scan to Network folder, Internet Fax, Fax and
Group)
18
MX-FXX1
Public switched telephone network, PBX
8 x 3.85 lines/mm (Standard), 8 x 7.7 lines/mm (Fine, Fine-Halftone), 8 x 15.4 lines/mm (Super Fine,
Super Fine - Halftone), 16 x 15.4 lines/mm (Ultra Fine, Ultra Fine - Halftone)
33.6 kbps down to 2.4 kbps Automatic fallback
MH / MR / MMR / JBIG
Super G3, G3 (the machine can only send faxes to and receive faxes from machines that support G3
or Super G3)
AB sizes: A3, B4, A4, A4R, 8-1/2" x 11", 8-1/2" x 11"R, B5, B5R, A5
Inch sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A4, A4R, 5-1/2" x 8-1/2"
Long originals (max. width 297 mm (11-45/64") x max. length 800 mm (31-31/64") can be transmitted
using the automatic document feeder. Scanning one side is possible.)
A3, B4, A4, A4R, B5, B5R, A5R (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
5-1/2" x 8-1/2"R)
Approx. 2 seconds (Super G3 mode/33.6 kbps, JBIG)
Approx. 6 seconds (G3 ECM mode/14.4 kbps)
Supplied from the machine
285 mm (W) x 66 mm (D) x 213 mm (H) (11-7/32" (W) x 2-39/64" (D) x 8-25/64" (H))
Approx. 1.6 kg (3.5 lbs.)
Extension telephone connection
Number of one-touch keys for storing
2
destinations*
Number of destinations that can be stored in a
2
group (1 key)*
Timer transmission
Program function
F-code transmission
Image memory
Possible (1 telephone)
Maximum number of keys: 999
Maximum number of destinations in one group
(1 key): 500
Yes
Yes (48 programs)
Supported (SUB/SEP (sub-address) and SID/PWD
(passcode) signals can be transmitted / received)
8 MB standard