Samsung sf150t Service Manual page 47

Operating Instructions
CALL TRANSFERRING
This feature allows the fax machine to transfer
incoming caller's message to a specified remote
location.
Choose YES to turn on this feature. The LCD
display asks to enter the telephone number you
want to be transferred.
Choose NO to turn off the feature.
CALL MONITORING
This feature enables you to hear callers leaving
messages on the machine.
Choose YES to turn on this feature.
Choose NO to turn off this feature.
CHARGE SAVER
This feature lets the user dial into this machine
from a remote phone and check whether anyone
has left a message without being charged for a
charge call. When toll saver is on and there are
messages waiting to be heard, the machine
answers on the number of rings you specify in the
ring count option. If there are no messages, the
machine answers on the second ring after the
number specified. This gives the user time to hang
up the phone before the machine answers - and
saves the price of the call.
Choose YES to turn on charge saver.
Choose NO to turn off charge saver.
MESSAGE RECORDING TIME
You can select the maximum time allowed for
caller messages and memos.
If you choose YES, the LCD display shows you the
time limits available : 0 second, 30 seconds, 60
seconds or 90 seconds. Choose the proper time. If
you choose 0, it allows callers to hear the greeting
message but doesn't permit them to leave
messages.
3-2
REMOTE PASSWORD
You can change the three-character password used
to access your machine from a remote phone. The
password is preset to "#139#" (pound one three
nine pound) at the factory. The first and the last #'s
are fixed, but you can change the middle numbers
from 0 to 9.
Enter the characters you want to use, then press
Start.
BATTERY ALARM
You can turn on the battery alarm feature. With
this feature on, the machine displays the low
battery message in the LCD and sounds beeps to
alert you low battery condition.
Choose YES to turn on the battery alarm feature.
Choose NO to turn off the battery alarm feature.
TAD SILENCE CHECK
In TAD mode, The machine decides the next
action when detected a silence of 10 seconds.
The actions are:
RX : Swiches to receive mode.
REC : Keeps the recording the silence.
CUT : Disconnect the line and returns to standby
mode.
TX LEVEL
From -9 dBm to -15 dBm is acceptable. You can set
the transmission level to between 0 and -15 dBm
in 1dB steps using the control panel keypad.
Accuracy is + 0 / -3 dBm.
CABLE EQUALIZER
Copper telephone wire attenuates low frequencies
less than high frequencies. The longer a cable is,
the more pronounced the effect. To compensate for
this attenuation you may need to set the machine
to match the cable length currently used. Select
short or long.
SF150T