Option 1: Set Up Through An Ios Device - Philips SW750M User Manual

Option 1: Set up through an
iOS device
1
Before setup, make sure that your iOS
device is connected to your home Wi-Fi
network.
2
As instructed on the app, press and hold
SETUP on the back of SW750M for more
than 3 seconds.
» Both the system status indicator on
the front panel and the Wi-Fi status
indicator on the SETUP button turns
solid amber.
3
Tap Next on the above app screen, and
then read how to proceed with network
setup.
EN
10
4
Select Wireless (Wi-Fi) under HOW DO
YOU WANT TO CONNECT?.
5
As instructed, exit the app, and then select
:) Philips Setup from the list of available
Wi-Fi networks.
6
After automatic detection of the speaker
successfully, open the SpeakerSet app again.
7
Select the name of your home Wi-Fi
network under Select a network to use
speaker.
8
Enter the password of your home Wi-Fi
network, and then tap Done to finish
setup.
9
Wait until successful connection of the
speaker to your home Wi-Fi network.
» The speaker beeps.
» The Wi-Fi status indicator on the
SETUP button turns off.
» The system status indicator on the
front panel turns solid green.