Functional Description - Makita 4101rh Instruction Manual

j) Use extra caution when making a "pocket
cut" into existing walls or other blind areas.
The protruding wheel may cut gas or water pipes,
electrical wiring or objects that can cause kickback.
17. Before using a segmented diamond wheel,
make sure that the diamond wheel has the
peripheral gap between segments of 10 mm or
less, only with a negative rake angle.
Additional Safety Warnings:
18. Never attempt to cut with the tool held upside
down in a vise. This can lead to serious
accidents, because it is extremely dangerous.
19. Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
20. Store wheels
recommendations.
damage the wheels.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
as per manufacturer
Improper storage

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
Portable residual current device
1
may
005151
Connect the tool to a power supply and test the Portable
Residual Current Device (PRCD) before using the tool.
Push the "RESET" or "ON" button and confirm that the
pilot lamp lights. Push the "TEST" button and confirm
that the pilot lamp goes out. Push the "RESET" or "ON"
button again to use the tool.
WARNING:
Do not use the tool if the pilot lamp does not go out
•
when the "TEST" button is pushed.
Adjusting the depth of cut
1
003510
Loosen the wing bolt on the depth guide and move the
base up or down. At the desired depth of cut, secure the
base by tightening the wing bolt.
CAUTION:
After adjusting the depth of cut, always tighten the
•
wing bolt securely.
6
1. TEST button
3
2. RESET or "ON"
2
button
3. Pilot lamp
4. Portable
residual current
device (PRCD)
4
1. Wing bolt
2. Base
2