Sony KLV-B20G10 Operating Instructions Manual page 5

Ventilation
Leave space around the LCD TV and the AC adaptor.
Otherwise, adequate air-circulation may be blocked causing
overheating and cause fire or damage the LCD TV.
30cm
10cm
10cm
AC adaptor
10 cm
10 cm
10 cm
• Never install the LCD TV as follows:
Air circulation
is blocked.
Wall
10cm
Leave this
space at
least.
10 cm
10 cm
Air circulation
is blocked.
Wall
Power Sources
Overloading
This LCD TV is designed to
operate on a 110-240 V AC
supply. Take care not to
connect too many appliances
to the same AC power jack as
this could result in fire or
electric shock.
AC power outlet
Do not use a poor fitting AC power jack.
Insert the plug fully into the AC power
outlet. If it is loose, it may cause arcing and
result in fire. Contact your electrician to
have the AC power jack changed.
When you disconnect the AC power cord,
disconnect it from the AC outlet first.
Moisture
Do not touch the AC power cord with a
wet hand. If you plug/unplug the AC
power cord with a wet hand, it may cause
electric shock.
Lightning storms
For your own safety, do not
touch any part of the LCD TV,
AC power cord or antenna lead
during lightning storms.
AC power cord protection
Pull out the AC power cord by
the plug. Do not pull on the
AC power cord itself.
Wiring
Unplug the AC power cord when wiring cables. Be sure to
unplug the AC power cord for your safety, when hooking up.
Cleaning
Clean the AC power plug
regularly. If the plug is covered
with dust and it picks up moisture,
its insulation may deteriorate and
result in fire. Unplug the AC
power plug and clean it regularly.
Grounding
To avoid electric shock, be sure to connect the supplied AC
power cord to a grounded power outlet.
If the plug fails to fit, contact your electrician to have the
outlet changed.
Continued
5
GB