Philips SC1992 User Manual page 12

ENGLISH
12
3 Check the appliance, especially the light exit window and
body attachment, for trapped hair, dust and fibres. If you see any
contamination, clean the appliance according to the instructions in
chapter 'Cleaning and maintenance'.
If shaving causes wounds or lesions, your skin may be more sensitive
to IPL than that of others. This may cause the IPL treatment to feel
uncomfortable or it may lead to other unwanted side effects. We advise
you to wait until the irritation has disappeared.
4 Once the hairs stop growing back, which usually happens after
4-5 treatments, you no longer have to shave before you use the
appliance.
Light intensity
Unlike professional light-based appliances, Philips Lumea Essential has been
developed for consumer use and its light pulses are gentler. Therefore you
can expect a convenient and effective treatment at a light intensity that
you find comfortable.
Philips Lumea Essential provides five different light intensities. Adjust the
light intensity to your skin and body hair colour and to a level you find
comfortable.
The recommended light intensities table below helps you to establish the
right light intensity.
1 Consult the table below to determine which light intensities are
appropriate for your skin and body hair colour.
Tip: You can put the table in the quick start guide on your skin and compare it
with your skin colour.
Tip: We advise you to store the quick start guide in the pouch for future
reference.
2 Reduce the light intensity if you experience any pain or discomfort.
Persons with darker skin run a higher risk of skin irritation because their
skin absorbs more light. Therefore lower intensities are recommended
for persons with darker skin.
The light pulse can feel warm or hot on the skin but should never be
painful. Different body areas may require different light intensities, see
to the table below. To prevent skin reactions, see chapter 'Using the
appliance', section 'Possible side effects and skin reactions'.
Recommended light intensities (1-5)
In the table below, 'x' means that the appliance is not suitable for you.
Note: The colour of your skin may change, for example because your skin
has been exposed to tanning. It may then be darker than during the previous
treatment. Therefore it is important that you check the setting to be used
before every treatment and per area. Some areas may be darker than others.