Citizen E101 Instruction Manual page 3

[2] Models with calendar (date and weekday) display
* If your watch has a screw-type crown, lift up the crown to loosen it before
operation. Be sure to press the crown down firmly after operation.
[Date display models]
Solar cell
Calendar setting
position
Time
setting
position
7
Normal position
Date
The position of the calendar may differ depending on models.
4
[Date, day of the week
display models]
Solar cell
Calendar setting
position
Crown 7
SUN
Normal position
Date, day of the week
Setting the time
1. Stop the second hand by pulling the crown out to the 2nd click (time setting
position).
2. Turn the crown to set the time.
3. The watch will start after the crown is firmly pushed back into its normal
position.
Setting the calendar
Time
1. Pull the crown out to the 1st click (calendar setting position).
setting
2. Set the desired date by turning the crown counterclockwise.
position
3. Set the desired day of the week by turning the crown clockwise.
• In the case of date display models, turning the crown clockwise will result in
Crown
the loose play of the crown.
4. After you have set the calendar, be sure to press the crown back to its
normal position.
• Do not adjust the calendar when the watch is reading as below. Otherwise
the calendar may not change correctly.
* Date display models ..... between 9:00 pm and 1:00 am
* Date, day of the week display models ..... between 9:00 pm and 4:00 am
5