Before Using; Setting The Time And Calendar - Citizen E101 Instruction Manual

A. BEFORE USING
This watch is not powered by a conventional battery, but is powered by
converting light to electrical energy.
Before using, be sure to fully charge your watch by exposing it to light.
(See "F. TIME REQUIRED FOR CHARGING", for charge time reference)
Once fully charged, the watch will continue to run for approximately 6 months
without additional charging. We do recommend exposing your watch to light
every day to ensure optimum performance. Always be sure to recharge the
watch before it stops.
Your watch features an Overcharge Prevention Function so there is no need to
worry about overcharging your watch.
A special energy storage cell is used to store electrical energy. This special cell
does not require replacement and is a clean energy unit that does not use any
toxic substances.
2
B. SETTING THE TIME AND CALENDAR
[1] Three-hand models without calendar display
* If your watch has a screw-type crown, lift up the crown to loosen it before
operation. Be sure to press the crown down firmly after operation.
Setting the time
1. Stop the second hand by pulling out the crown.
2. Turn the crown to set the time.
3. After setting the time, firmly push the crown back into its normal position.
Solar cell
Time-setting position
Crown
Normal position
3