Removing Packaging Reinforcement; Removing The Transit Bolts - Beko HTV 8633XS0 User Manual

Installation
Operate the product in a well ventilated and dust free environment.

3.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the
packaging reinforcement attached to the ribbon.
DANGER!
Your
reinforcement as displayed in the figure.
Be careful not to get your hand caught under the
machine during this procedure.

3.3 Removing the transit bolts

PRECAUTION
• Do not remove the transit bolts before removing the
A
packaging reinforcement.
• Remove the transit bolts before operating the washing
machine! Otherwise, the product will get damaged.
1 Use a tool to loosen all bolts until they rotate freely. (C)
2 Remove the transit bolts by turning them slightly.
3 Attach the plastic covers supplied in the user manual bag into the holes on the rear
panel. (P)
19 / EN
product is
1
heavy. Remove
2
packaging
Washer-Dryer / User's Manual
3