Table of Contents
Advertisement
7.
Select Channel Data Rate and highlight the data rate that your service provider has designated your
channel to connect at. The channel data rate choices are Nx56k or Nx64k. The default is Nx64k. Press
Return.
8.
Select Data Link Encapsulation and highlight the method of encapsulation that you want to use from the
pop-up menu. The choices offered are PPP, RFC1483, HDLC (Cisco), and Frame Relay. The default setting
is Frame Relay.
The screen will offer different options depending on your selection.
Frame Relay Options
Operation Mode...
Line Encoding...
Framing Mode...
Number of DS0 Channels:
First DS0 Channel:
Channel Data Rate...
Data Link Encapsulation...
PPP over Frame Relay Enabled:
DLCI:
LMI:
TO MAIN MENU
Return/Enter takes you back to previous screen.
Enter Information supplied to you by your telephone company.
Operation Mode...
Line Encoding...
Framing Mode...
Number of DS0 Channels:
First DS0 Channel:
Channel Data Rate...
Data Link Encapsulation...
RFC1483 Mode...
PPP over Ethernet (PPPoE):
TO MAIN MENU
Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.
If you selected Frame Relay as a Data Link Encapsulation method, the PPP over Frame Relay Enabled
toggle appears.
If you toggle PPP over Frame Relay Enabled to On, the DLCI field appears, allowing you to enter a DLCI
value (16 is the default). The LMI option also appears, allowing you to select from ANSI (Annex D),
CCITT (Annex A), LMI, or None from the pull-down menu.
If you selected PPP, the next pop-up menu PPP Mode offers the choice of VC Multiplexed or LLC SNAP.
T1 Line Configuration
Normal
B8ZS
ESF
1
1
Nx64k
Frame Relay
On
16
None
NEXT SCREEN
RFC 1483 Options
T1 Line Configuration
Normal
B8ZS
ESF
1
1
Nx64k
RFC1483
Bridged 1483
Off
NEXT SCREEN
PPP Options
Operation Mode...
Line Encoding...
Framing Mode...
Number of DS0 Channels:
First DS0 Channel:
Channel Data Rate...
Data Link Encapsulation...
PPP Mode...
TO MAIN MENU
Return/Enter takes you back to previous screen.
Enter Information supplied to you by your telephone company.
ATM Operation Mode Options
Operation Mode...
Line Encoding...
Framing Mode...
Number of DS0 Channels:
First DS0 Channel:
Data Link Encapsulation...
RFC1483 Mode...
PPP over Ethernet (PPPoE):
Data Circuit VPI (0-255):
Data Circuit VCI (32-65535):
TO MAIN MENU
Return/Enter goes to new screen.
Enter Information supplied to you by your telephone company.
Easy Setup 6-7
T1 Line Configuration
Normal
B8ZS
ESF
1
1
Nx64k
PPP
VC Multiplexed
NEXT SCREEN
T1 Line Configuration
ATM
B8ZS
ESF
1
1
RFC1483
Bridged 1483
Off
0
35
NEXT SCREEN
Advertisement
Table of Contents
