Table of Contents
Advertisement
4-6 Getting Started Guide
Static configuration (optional)
If you are manually configuring for a fixed or static IP address,
perform the following:
1.
Go to the Apple menu. Select Control Panels and then
TCP/IP or MacTCP.
2.
With the TCP/IP window open, go to the Edit menu and
select User Mode. Choose Advanced and click OK.
Or, in the MacTCP window, select Ethernet and click the
More button.
3.
In the TCP/IP window or in the MacTCP/More window, select or type information into the fields as shown in
the following table.
Connect via:
Configure:
IP Address:
Subnet mask:
Router or Gateway address:
Name server address:
Implicit Search Path:
Starting domain name:
4.
Close the TCP/IP or MacTCP control panel and save the settings.
5.
If you are using MacTCP, you must restart the computer. If you are using Open Transport, you do not need
to restart.
Option:
Ethernet
Manually
192.168.1.2
255.255.255.0
192.168.1.1
Enter the primary and secondary name server
addresses given to you by your ISP
Enter your domain name; if you do not have a
domain name, enter the domain name of your ISP
Select/Type:
Advertisement
Table of Contents
