Connecting To An Ethernet Network - Netopia 4622 T1 Getting Started Manual

3-2 Getting Started Guide
Once the Netopia 4622 is properly configured and connected to your LAN, PC and Macintosh computers that
have their required components in place will be able to connect to the Internet or other remote IP networks.

Connecting to an Ethernet Network

You can connect a standard 10/100Base-T Ethernet network to the Netopia 4622 using its Ethernet ports.
Netopia 4622 back panel
8
Ethernet
8 port
Ethernet switch
The Netopia 4622 in a 10/100Base-T network
To connect your 10/100Base-T network to the
Netopia 4622 through the Ethernet ports, use
standard Category 5 Ethernet cables with RJ-45
connectors.
If you have more than eight devices to connect,
you can attach additional devices using another
10- or 100Base-T hub or switch. The Ethernet
ports on the router will auto detect 10- or
100Base-T.
Crossover cables are not required.
1
PC
Macintosh
WAN Console
T1 port Console port
8
Ethernet
1
PC
Power
Power port
10Base-T
Hub