Bosch GKE Professional 40 BCE Original Instructions Manual page 30

OBJ_BUCH-716-001.book Page 30 Tuesday, January 13, 2009 3:26 PM
30 | English
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended for sawing wood
such as wooden beams, planks, branches, tree
trunks, etc., and for sawing of trees. Cuts can be
sawed with or across the grain.
Delivery Scope
Carefully remove the machine from its packag-
ing and check if the following parts are com-
plete:
– Chain saw
– Cover
– Chain
– Chain bar
– Chain guard
– Operating instructions
When parts are missing or damaged, please con-
tact your dealer.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Rear handle
2 Lock-off button for On/Off switch
3 On/Off switch
4 Oil filler cap
5 Activation lever for kickback brake (hand
guard)
6 Front handle
7 Deactivation mark "for kickback brake"
8 Nose sprocket
9 Chain guard
10 Saw chain
11 Chain bar
12 Gripping teeth
1 609 929 P88 | (13.1.09)
13 Chain-tensioning ring (red)
14 Locking knob
15 Cover
16 Serial number
17 Symbol for rotation and cutting direction
18 Drive sprocket
19 Oil outlet
20 Guide fin for chain bar
21 Fastening bolt
22 Chain tensioning catch
23 Chain catch bolt
24 Oil level gauge
25 Reset button for thermal safety switch
26 Red dot
27 Protective lid of chain-tensioning mecha-
nism
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Noise/Vibration Information
Measured values determined according to
2000/14/EC and EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 96 dB(A);
Guaranteed sound power level lower than
105 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
2
tainty K =1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
2
=4.8 m/s , Uncer-
Bosch Power Tools