Checking The Static Sag Of The Shock Absorber - KTM 2014 690 Enduro R EU Owner's Manual

10 TUNING THE CHASSIS
10.9

Checking the static sag of the shock absorber

Finishing work
–
Remove the motorcycle from the lift stand. (
–
Measure distance
–
Hold the motorcycle upright with the aid of an assistant.
–
Measure the distance between the rear axle and the fixed point again.
A 0 0 A
–
Note down the value as dimension
Info
The static sag is the difference between measurements
–
Check the static sag.
Static sag
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
0 0 B B
400989-10

of rear wheel unloaded. (

.
18 mm (0.71 in)
p. 74)
p. 67)
 
and .
x ( p. 69)
68