Woods 8000 Operator's Manual page 18

PRE-OPERATION CHECK LIST
(OWNER'S RESPONSIBILITY)
___ Review and follow all safety rules and safety
decal instructions on safety rules, page 5 through
page 11.
___ Check that all safety decals are installed and in
good condition. Replace if damaged.
___ Check to make sure all shields and guards are
properly installed and in good condition. Be sure
that either the discharge shield or optional dis-
charge tube is installed.
___ Check that all hardware and cotter pins are prop-
erly installed and secured.
18 Operation
___ Check that equipment is properly and securely
attached to tractor.
___ Check all lubrication points and grease as
instructed in page 19.
___ Make sure driveline spring-activated locking pin
or collar slides freely and is seated firmly in trac-
tor PTO spline groove and in gearbox spline
groove.
___ Do not allow riders.
___ Check condition of chipper blades before opera-
tion.

51210 (1/1/2016)