Suzuki 2010 VZ800L0 Supplementary Service Manual page 11

10 VZ800L0 ('10-MODEL)
• Remove the damper rod bolt.
NOTE:
If the damper rod bolt cannot be removed, insert an appropriate
rod A, for example, long flat blade screwdriver, into the gap B
between inner tube and damper rod to prevent the damper rod
from rotating.
• Remove the inner rod/damper rod (cartridge) 6.

Do not disassemble the inner rod/damper rod (car-
tridge).
• Extract the outer tube from the inner tube.
NOTE:
Be careful not to damage the "ANTI-FRICTION" metals.
• Remove the dust seal 7.
Inner rod
Damper rod
Inner tube