Disposal; Manufacturer's Warranty - Tools - Hilti GX 100-E Operating Instructions Manual

10. Disposal

Most of the materials from which Hilti tools are manufactured can be recycled. The materials must be correctly
separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back
your old fastening tools for recycling. Please ask your Hilti customer service department or Hilti sales represen-
tative for further information. Please observe regional and international guidelines and regulations.
Separate the individual parts as follows:
Component / assembly
Toolbox
Tool casing
Battery
(-NOTE-
The battery is designed to last the life of the tool.)
Electronics parts
Screws, small parts
Valve head
Gas can
11. Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical sys-
tem is maintained. This means that only original Hilti
consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement
as a result of normal wear and tear are not covered by
this warranty.
Additional claims are excluded, unless stringent
national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
Printed: 07.07.2013 | Doc-Nr: PUB / 5069872 / 000 / 00
Main material
Plastic
Plastic / synthetic rubber
Various
Steel
Plastic
Recycling
Plastics recycling
Plastics recycling
Battery recycling
(observe specific national regulations)
Electronics scrap
Scrap metal
Plastics recycling
Pay attention to regional and national
regulations
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporane-
ous comments and oral or written agreements con-
cerning warranties.
11.1 Gas can
Observe the use-by date for the gas can (printed on the
edge of the can).
en
23