Advertisement
• Set the desired starting time by using the buttons
„H" and „MIN" (2). A quick run is possible by
pressing the buttons constantly.
• After releasing the button „TIMER", the current
time appears again after 2 seconds. The choosen
starting time for brewing process is programmed. It
remains until a new starting time will be programmed
or when the appliance disconnected from socket.
• By pressing the "TIMER" button again shortly, the
function is activated for the next brewing cycle. Blue
LED light shows activation and the programmed
starting time is visible in the display for a few
seconds.
• The timer-function can be de-activated by a further
press on the "TIMER" button. The blue LED light
expires.
• The brewing process can be started independently
from timer-function by pressing the "ON/OFF"
button.
Adjustable warmkeeping time
Longterm warmkeeping of the coffee on the warming-
plate leads to loss of taste. Therefore we recommend
a warmkeeping time for not longer than 30 minutes.
This time is presetted for securing an optimal coffee
quality and also to avoid unneeded energy consumption.
If you want to keep your coffee warm for a longer
time, you can set the time in 4 steps until appliance
switches off automatically.
• For setting the warmkeeping time keep the
"ON/OFF" button pressed. 0:30 appears in the
display.
• Set the needed warmkeeping time by pressing the
"MIN" button in 30 minutes steps (up to 2 hours
max.)
• After releasing the "ON/OFF" button, the current
time appears again after 2 seconds. Last setting
maintains even when the appliance will be discon-
nected from socket.
Descaling programme
To secure a proper function of the appliance, it has to
be descaled regularly. We recommend to use Swirl
Oxy-Power or Swirl
®
necessary process, the appliance is equipped with a
descaling programme.
• Once the number of brewing cycles, based on the
individual adjustment of water hardness, is reached,
the red LED (4) lights up permanently. This shows
that descaling should be done shortterm.
• To start descaling, fill the watertank with descaling
agent according to the information on its packaging.
• Press "CALC" button (4). The red LED flashes.
• The descaling process takes 25 minutes. The remai-
6
Citrus-Clean. To simplify this
ning time is shown in the display.
• The red LED expires after the descaling process has
finished. The appliance switches off automatically and
display shows the current time again.
• Clean the appliance after descaling by 2 brewing
cycles with clear water without coffee to remove
descaler residues.
Cleaning and maintenance
• Remove cord from socket before you clean the
appliance.
• Never immerse the appliance or cord in water.
• Clean the surface with a soft, damp cloth.
• Clean the parts which are in contact with coffee
after each use. Filter cone and glass jug are dishwas-
her safe.
• Water tank can be cleaned under running water.
Do not use harsh and abrasive brushes.
Hints for disposal
• Please inform yourself about disposal rules for
electrical appliances at your dealer or community.
• Packaging materials are resources and therefore
reusable. Please give it back to the renewable
resource cycle.
®
Advertisement
