Other Features; Set The Alarm Timer; Set The Sleep Timer; Listen To An External Device - Philips BTB2370 User Manual

6 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can
select DISC, USB,DAB,or FM as the alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for 3 seconds.
» The hour digits are displayed and begin
to blink.
2
Press / repeatedly to select an
source(DISC, USB, DAB or FM).
3
Press SLEEP/TIMER to confirm.
» The hort digits begin to blink.
4
Repeat steps 2-3 to set the hour, minute,
and adjust the volume of the alarm.
Note
•
If no button is pressed within 90 seconds, the unit exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
• Press SLEEP/TIMER repeatedly to view
the alarm information and activate or
deactivate the alarm.
» If the timer is activated,
» If the timer is deactivated, [TIMER
OFF] (timer off) is displayed and
disappears.
Tip
•
If DISC/USB source is selected, but no disc is placed
or no USB connected, the unit switches to the tuner
source automatically.
EN
16
is displayed.

Set the sleep timer

• To set the sleep timer, when the unit
is switched on, press SLEEP/TIMER
repeatedly to select a set period of time
(in minutes).
» When the sleep timer is activated,
displayed. Otherwise,

Listen to an external device

You can enjoy music from an external device
connected to the unit through an audio cable.
1
Press USB/AUDIO IN repeatedly to select
the AUDIO IN source.
2
Connect an audio cable (not supplied)
between:
the AUDIO IN socket (3.5 mm) on
•
the unit;
• and the headphone socket on an
external device.
3
Play music from the connected external
device (see the user manual of the device).
is
disappears.