Program Tracks; Play From Bluetooth-Enabled Devices - Philips BTB2370 User Manual

Program tracks

You can program a maximum of 20 tracks.
1
Stop play, and then press PROG/SCAN to
activate programming mode.
2
For MP3 tracks, press ALBUM/PRESET
to select an album.
3
Press / to select a track, and then
press PROG/SCAN to confirm.
4
Repeat steps 2-3 to program more tracks.
5
Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, stop play, and
then press
Play from Bluetooth-enabled
devices
Note
•
Before pairing a device with the unit, read the user
manual of the device for Bluetooth compatibility.
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
Any obstacle between the unit and the device can
reduce the operational range.
•
The effective operation range between this unit and
your Bluetooth enabled device is approximately 10
meters (30 feet).
•
The unit can memorize up to 2 previously connected
Bluetooth devices.
To stream music to the unit wirelessly, you need
to pair your Bluetooth enabled device with the
unit.
/MENU.
/
1
Press
source.
» [BLUETOOTH] (Bluetooth) is
displayed.
» The Bluetooth indicator flashes blue.
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'Philips BTB2370' on your
Bluetooth enabled device, and if necessary
input '0000' as the pairing password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
» 'CONNECTED' is displayed.
4
Play music on the connected device.
» Music streams from your Bluetooth
enabled device to this unit.
• If you fail to search for 'Philips
BTB2370' or cannot pair with this
unit, press and hold
seconds until the Bluetooth indicator
flashes quickly to enter pairing mode.
PIN
Philips BTB2370
0000
/PAIRING to select the Bluetooth
/PAIRING for 3
EN
11