Get Started; Connect Speakers; Connect Fm Antenna; Connect Power - Philips BTB2370 User Manual

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
laser exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Connect speakers

Note
•
Insert the stripped portion of each speaker wire into
the socket completely.
•
For better sound quality, use the supplied speakers only.
1
For the right speaker, find the sockets on
the back of the main unit marked "R".
2
Insert the red wire into the red (+) socket,
and the black wire into the black (-) socket.
3
For the left speaker, find the sockets on the
main unit marked "L".
4
Repeat step 2 to insert the left speaker
wire.
To insert each speaker wire:
1
Hold down the socket flap.
2
Insert the speaker wire fully.
3
Release the socket flap.

Connect FM antenna

• Before listening to radio, connect the
supplied FM antenna to this device.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
EN 7