Program Radio Stations Manually; Select A Preset Radio Station; Other Features; Listen To An External Device - Philips MC127/91 User Manual

Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
» [P-] is displayed.
3
Press PRESET +/- to allocate a number to
this radio station, and then press PROG to
confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

In tuner mode, press PRESET +/- to select a
preset number.
Tip
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.

8 Other features

Listen to an external device

You can listen to an external device through this
micro Hi-Fi system.
1
Press SOURCE repeatedly to select AUX
source.
2
Connect the supplied MP3 link cable to:
MP3 LINK jack (3.5 mm) on the unit
•
• the headphone jack on an external
device
3
Start to play the device (see the device
user manual).
EN 13