Technical Data; Declaration Of Conformity; Intended Use - Bosch AQT 33-11 Original Instructions Manual

OBJ_BUCH-2384-002.book Page 6 Wednesday, February 18, 2015 4:12 PM
6 | English
Transport

Switch off the motor and secure the
unit before transporting.
Maintenance
 Switch off the unit prior to all cleaning
and maintenance work and before re-
placing components. Pull out the mains
plug if the unit is mains-operated.

Repairs may only be carried out by
authorised Bosch Service Centres.
Accessories and spare parts
 Accessories and spare parts which
have been approved by Bosch must
be used. Original accessories and
spare parts guarantee that the unit
can be operated safely and without
any breakdowns.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
Movement direction
Weight
On
Off
Lo Low pressure
Hi High pressure
Accessories

Intended Use

The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories such as cleaning agents approved by Bosch are
used.
Intended use is related to operation within 0°C and 40°C am-
bient temperature.
This product should not be used for professional use.
F 016 L81 121 | (18.2.15)

Technical Data

Pressure washer
Article number
Rated power
Supply temperature max.
Supply rate min.
Allowable pressure
Rated pressure
Rated Flow
Maximum inlet pressure
Autostop function
Weight according to
EPTA-Procedure 01/2003
Protection class
Serial number See serial number (rating plate)
Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0.153 ohm.
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-79.
Typically the A-weighted noise levels of the product are:
Sound pressure level 85 dB(A); sound power level 94 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60335-2-79:
2 2
a =4 m/s , K=1,5 m/s .
h

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under Technical Data is in conformity with all relevant
provisions of the directives 2011/65/EU, until 19 April
2016: 2004/108/EC, from 20 April 2016 on: 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 60335-2-79.
2000/14/EC: Guaranteed sound power level 98 dB(A). Con-
formity assessment procedure according to Annex V.
Equipment category: 27
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
17.02.2015
AQT 33-11
3 600 HA7 6..
kW 1.3
°C 40
l/min 5.5
bar 11
MPa 7.4
l/min 4.7
MPa 1

kg 4.5
/II
on pressure washer.
Bosch Power Tools