Table of Contents
Advertisement
700 Series Managed Switch User's Guide for Software v2.1
Use the no command to disable mirror.
Negotiation
This command lets you enable speed and duplex auto-negotiation.
Syntax
FSM726(config-if)# negotiation auto
No
The
command negates one of your previously given commands.
No
Syntax
FSM726(config-if)# no <commands>
Where
= the command which you wish to negate.
<command>
For example, suppose you previously turned on flow control on this particular interface by using
the
command, and you changed your mind and wish to turn it off. The command to do
flow-ctrl
so would be
no flow-ctrl
Another example:
Suppose you have configured this particular interface to e a mirror source with the mirror source
command. To disable the port as a port mirror, use the no mirror source command.
Type
The type command let you select whether to use the RJ-45 interface or the GBIC interface on your
gigabit ports (port 25 & 26). If a GBIC module is present, you may wish to use gbic mode;
however, if no GBIC module is present, the switch defaults to the RJ-45, also known as
twisted-pair (TP).
Syntax
FSM726(config-if)# type <interface type>
6-16
Command Line Interface
SM-10004-02
Advertisement
Table of Contents
