Midi Setup; Continuous Save, Preset Save; Want More Cabinets - Two Notes torpedo live User Manual

7 MIDI setup

The MIDI parameter can be found on the SETUP mode. The TORPEDO Live handles both preset
change commands (PROGRAM CHANGE or PC) and parameter change commands (CONTROL
CHANGE or CC). This way, you can interact with all the parameters on the machine from any kind of
standard MIDI controller, like a MIDI pedalboard or a keyboard.
1. Select if the machine is to receive to PROGRAM CHANGE and/or CONTROL CHANGE com-
mands. For example, if you plan to use the preset switching (PC), the CC receive can be Off.
2. Set a MIDI channel for the machine to receive. You can choose to receive all channels, which
is useful when you don't know exactly on which channel the commands are sent.
3. With the MIDI monitor, check the correct reception of the commands by the TORPEDO textitLive.

8 Continuous save, preset save

The state of the machine is saved in real time, continuously, and is reloaded when you switch on the
machine. The parameters continuously saved are:
• the current preset,
• the modified preset if any (with all its parameters and name),
• the SETUP mode parameters,
• and the OUT LEVEL.
The navigation is not saved (for example if you were in a particular parameter menu). The purpose
is to reload the machine at its initial state, after a power outage on stage, for example.
When you edit a preset, a star can be seen after the preset number in PERFORM mode. It is possible
to navigate through the presets and to come back to the preset you are editing. This way, the
modified and the non-modified preset can be compared. If you edit a second preset, this will cancel
the modification on the first edited preset if it was not saved. It is only possible to edit one preset at a
time.
Saving a preset can be done from any mode, by holding the HOLD TO SAVE/EDIT button. The
saving process is done in three steps:
1. "Rename & hold...": choose the preset name, use PARAM to change the character position and
VALUE change the character. Hold the button to go to the next step.
2. "Hold to save to:": Choose where you want to save the preset, the default slot is the current
one. Hold the button to go to the next step.
3. You will see on the screen "Saving, please wait..." for less than a second, the preset is now saved.

9 Want more cabinets ?

It is possible to add new cabinets or IRs files to your TORPEDO Live using the TORPEDO Remote soft-
ware. Download the software from the Two Notes website: http://www.two-notes.com. Take control
of the machine through USB, change the parameter, arrange or add/delete cabinets and IR files or
Two Notes Audio Engineering
Configuring and using the TORPEDO Live
TORPEDO Live 24