Denwa Communications DW-V-AXT-ANDROID User Manual page 42

Motion Detection
UDP Discover
Motion detection is used to record the change of the
surrounding environment.
 Enable: The default status is OFF
 Notification: It supports two types FTP and EMAIL.
 Detection Delay: Setup the time interval for
detection
 Capture Delay: Setup the capture delay time
 Detection Delay: The smaller value, the capture
picture is more accurate.
 FtpServer: Enter the FTP server address.
 Port: The Port is 21 by default.
 FtpUser: Enter the FTP server user name.
 FtpPwd: Enter the corresponding FTP server
password.
 FtpPath: Enter "Picture".
 SmtpServer: Enter the SMTP server format
 Port: Enter the SMTP server port.
 SmtpUser: Enter the sender email address
 SmtpPwd: Enter the sender email password
 Email Subject: Enter the subject name.
 EmailRecvMail: Enter the receiver email address.
 EmailRecvName: Enter the receiver name.
 EmailSendMail: Enter the sender email address.
 EmailSendName: Input the sender name.
 Email content: enter the content name.
To setup the UDP Discover parameters.
 CallNo: Setup the other side number
 BuildNo: Setup the Build number as the other side
has.
 UnitNo: Setup the Unit number as the other side
has.
 Floor: Setup the Floor number as the other side has.
 RoomNo: Setup the RoomNo as the other side has.
DW-V-AXT-ANDROID
 DeviceNo: Setup serial number