Features - RIDGID R350FCA Operator's Manual

FEATURES

PRODUCT SPECIFICATIONS
Operating Pressure............................................. 70-120 psi
Magazine Capacity ................................................ 300 nails
Air Consumption............................ 0.28 ft
Air Inlet .............................................................. 3/8 in. NPT
KNOW YOUR FRAMING COIL NAILER
See Figure 1, page 17.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE EXHAUST
The exhaust can be adjusted to a variety of positions
depending on operator preference.
DEPTH OF DRIVE ADJUSTMENT
The tool-free depth of drive adjustment lets you select
precise driving depth of the fastener.
EZ LOAD WITH OFFSET MAGAZINE
™
The EZ Load feature makes reloading quick and easy. The
offset magazine has three adjustment positions to accept
various nail sizes.
IN-HANDLE AIR FILTER
The self-cleaning in-handle air filter helps keep debris out
to extend the life of the tool.
INTERNAL PISTON CATCH
The internal piston catch delivers consistent driving power.
Weighted sound impulse power level ....................96.5 dBA
Emission sound pressure level ..............................84.2 dBA
Vibration ............................................................... 3.57 m/s
/cycle at 100 psi
3
Weight ........................................................................7.8 lb.
MUFFLER
The muffler reduces noise during operation.
NO-MAR PAD
The no-mar pad prevents marring and denting when using
the tool on softer woods.
qUICK-CONNECT SWIVEL CONNECTOR
The quick-connect swivel connector helps prevent hose
tangles.
RAFTER HOOK
The tool can be hung from a rafter when disconnected and
not in use.
SELECTABLE TRIGGER
The selectable trigger lets the operator choose between
Contact Actuation for higher productivity and Single
Sequential Actuation for precise fastener placement.
TOE-NAILING CLAW
The toe-nailing claw reduces slipping during angled nailing
operations.
WIRE DEFLECTOR
The transparent wire deflector helps to prevent pieces of
wire from flying off the coil and toward the operator as the
nails are driven.
8 – English
2