Download Print this page

Specification - Hitachi UC 18YRL Handling Instructions Manual

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
English

SPECIFICATION

CHARGER
Model
Charging time
Charging voltage
Weight
APPLICATION
For charging the HITACHI BATTERY
EB712S, EB7S, EB714S, FEB7S, EB7B,
EB912S, EB9S, EB914S, EB914, FEB9S, EB9B, EB924,
EB926H, EB930H, EB933X,
EB1212S, EB12S, EB1214S, EB1214L, FEB12S, EB12B,
EB1220BL, EB1224, EB1226H, EB1230H,
EB1230HL, EB1230X, EB1233X
EB1412S, EB1414S, EB1414, EB14B, EB1424,
EB1426H, EB1430H, EB1430X, EBL1430, EB1433X
EB1812S, EB1814SL, EB18B EB1820, EB1820L,
EB1824L, EB1826HL, EB1830H, EB1830HL, EB1830X,
EBM1830, EB1833X
CHARGING
Before using the power tool, charge the battery as
follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the charge status lamp will blink in red.
(At 1-second intervals).
Table 1
Before
charging
While
Charge
charging
status lamp
(red)
Charging
complete
Charging
impossible
Overheat
Overheat
lamp
standby
(green)
NOTE: When standby for cooling battery, UC18YRL cools the overheated battery by cooling fan.
7
Indications of the lamp
Blinks
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Lights
Lights continuously
Blinks
Lights for 0.5 seconds. Does not light
for 0.5 seconds. (off for 0.5 seconds)
Flickers
Lights for 0.1 seconds. Does not light
for 0.1 seconds. (off for 0.1 seconds)
Lights
Lights continuously
UC18YRL / UC18YFL
Approx. 20 – 50 minutes
7.2 – 18 V
0.6 kg
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it
contacts the bottom of the charger and checking
the polarities as shown in Fig. 1.
CAUTION:
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as
a deformed recharging terminal.
3. Charging
When inserting a battery in the charger, the charge
status lamp will light up continuously in red.
When the battery becomes fully recharged, the
charge status lamp will blink in red. (At 1-second
intervals.) (See Table 1)
(1) Lamp indication
The indications of the lamp will be as shown in
Table 1, according to the condition of the charger
or the rechargeable battery.
Malfunction in the
battery or the charger
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)

Advertisement

loading

This manual is also suitable for:

Uc 18yfl