Washing Machine Description - Indesit WITXL 1051 Instructions For Use Manual

Washing machine description

Control panel
GB
Detergent dispenser to add detergent and fabric sof-
tener.
LEDs to find out which wash cycle phase is under way.
If the Delay Timer function has been set, the time left until the
programme starts will be indicated.
FUNCTION keys to select the functions available.
The button corresponding to the function selected will
remain on.
SPIN SPEED knob to set the spin speed or exclude the
spin cycle completely.
TEMPERATURE knob to set the temperature or the cold
wash cycle.
ON/OFF key to turn the washing machine on and off.
START/RESET key to start the programmes or cancel
incorrect settings.
ON-OFF/LID LOCK led:
If this LED is on, the appliance Lid is locked to prevent it from being opened accidentally; to avoid any damages, you must
wait for the lamp to flash before you open the Lid.
.
!
The rapid flashing of the ON-OFF/LID LOCK Led together with the flashing of at least one other LED indicates there is an
abnormality.
6
START/RESET
button
FUNCTION
Buttons
LEDs
SPIN
knob
LID LOCKED
LED
TEMPERATURE
PROGRAMME
knob
knob
ON-OFF/LID LOCK led, to find out whether the wash-
ing machine is on (flashing) and if the lid may be opened.
PROGRAMME knob to set the programmes.
The knob stays still during the cycle.
Standby mode
This washing machine, in compliance with new energy sa-
ving regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON/OFF button briefly and wait for the
machine to start up again.
ON/OFF
button