JVC KD-S7350 Service Manual page 6

KD-S7350/KD-S690
2.1.6 Removing the main board assembly
(See Fig.8.)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover and rear bracket
(1) Remove the two screws G attaching the main board.
(2) Disconnect the connector CN501 and remove the main
board.
2.1.7 Removing the CD mechanism assembly
(See Fig.9.)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover, rear bracket and main board.
(1) Remove the three screws H.
1-6 (No.49778)
Main board
G
CN501
Fig.8
CD mechanism assembly
Fig.9
G
H
Top chassis
H