JVC KD-S7350 Service Manual page 11

2.2.4 Removing the chassis unit
(See Figs.8 and 9)
• Prior to performing the following procedure, remove the top
cover and connector board.
(1) Remove the two suspension springs (L) and (R) attaching
the chassis unit to the frame.
CAUTION:
• The shape of the suspension spring (L) and (R) are dif-
ferent. Handle them with care.
• When reassembling, make sure that the three shafts
on the underside of the chassis unit are inserted to the
dampers certainly.
Chassis unit
Suspension spring (R)
Suspension spring (R)
Fig.8
Chassis unit
Shafts
Damper
Damper
Fig.9
KD-S7350/KD-S690
Suspension spring (L)
Frame
Suspension spring (L)
Shaft
Damper
Frame
(No.49778)1-11