JVC KD-S7350 Service Manual page 5

2.1.3 Removing the heat sink
(See Fig.4.)
(1) Remove the two screws B and two screws C on the left
side of the main body.
2.1.4 Removing the bottom cover
(See Figs.5 and 6.)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the body and release the two joints c, two joints
d and joint e .
CAUTION:
Do not damage the main board when releasing the joint e us-
ing a screwdriver. (See Figs.5 and 6.)
2.1.5 Removing the rear bracket
(See Fig.7.)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws D, three screws E and two
screws F on the back of the body.
(2) Remove the rear bracket.
Heat sink
C
Fig.4
Joint c
Joint e
Fig.5
Bottom cover
Joint c
Fig.6
E
Rear bracket
D
Fig.7
KD-S7350/KD-S690
B
Bottom cover
Joint d
Joint d
Joint e
F
E
D
(No.49778)1-5