Hardware Description; Front Panel - NETGEAR WAG102 Reference Manual

ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)

Hardware Description

This section describes the front and rear hardware functions of the WAG102.

Front Panel

The WAG102 front hardware functions are described below.
1
Figure 1-1
The following table explains the LED indicators:
Table 1-1. Front Panel LED Indicators
Item LED
1 PWR
Off
On
2 TEST
Blink
3 100 LINK ACT
Off
Solid On
Blink
Introduction
2
3
DESCRIPTION
Power Indicator
No power.
Power is on.
Self Test Indicator
Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.
100 Mbps Fast Ethernet LAN Activity Indicator
Indicates no 100 Mbps Fast Ethernet link detected
100 Mbps Fast Ethernet link detected, no activity.
Indicates data traffic on the 100 Mbps Fast Ethernet LAN.
v2.0, September 2006
4
5
6
1-7