Compatible And Related Netgear Products; System Requirements - NETGEAR WAG102 Reference Manual
802.11a/g prosafe dual band wireless access point
Hide thumbs
Also See for WAG102:
- Installation manual (2 pages) ,
- Specifications (2 pages) ,
- Reference manual (82 pages)
Table of Contents
Advertisement
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
Compatible and Related NETGEAR Products
For a list of compatible products from other manufacturers, see the Wireless Ethernet
Compatibility Alliance Web site (WECA, see http://www.wi-fi.net).
The following NETGEAR products work with the WAG102 Wireless Access Point:
•
WAG511 ProSafe 108 Mbps Dual Band PC Card
•
WAG311 ProSafe 108 Mbps Dual Band PCI Card
•
WG311T 802.11g 108 Mbps Wireless PCI Card
•
WG511T 802.11g 108 Mbps Wireless CardBus Adapter
•
WG511 802.11g 54 Mbps Wireless CardBus Adapter
•
WG111 801.11g 54 Mbps Wireless USB Adapter
System Requirements
Before installing the WAG102, make sure your system meets these requirements:
•
A 10/100 Mbps Local Area Network device such as a hub or switch
•
The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it
•
A 100-240 V, 50-60 HZ AC power source
•
A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or
Netscape Navigator 4.78 or above
•
At least one computer with the TCP/IP protocol installed
•
802.11b or 802.11g-compliant devices, such as the NETGEAR WG511 Wireless Adapter
Introduction
v2.0, September 2006
1-5
Advertisement
Table of Contents
