NETGEAR RH348 Reference Manual page 96

Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Table 9-2. System Maintenance Status Menu Fields
Field
ISDN:
Link
Type
TXPkt
RXPkt
Error
CLU
ALU
Up Time
Total Outcall Time
Ethernet:
Status
TX Pkt
RX Pkt
Collision
Name
RAS S/W Version
ISDN F/W Version
Ethernet Address
9-2
Description
This field displays the statistics for B1 and B2 channels. For each channel the screen
displays:
The remote node the channel is currently connected to, or the status of the channel
(Idle, Calling, or Answering).
The current connecting speed (56 K or 64 K).
The number of packets transmitted on this channel since reset or manual clear.
The number of packets received on this channel since reset or manual clear.
The number of error packets on this channel since reset or manual clear.
The current line utilization—percentage of current bandwidth used on this channel.
The average line utilization —average CLU for this channel.
The time that this channel has been connected to the current remote node.
The total outgoing call time for both B1 and B2 channels since the system has been
powered on.
Note that the time is shown in B-channel hours. When both B channels are active
simultaneously, the values in this field will increase at twice real time.
This field displays the current status of the LAN connection on your router.
This field displays the current status of the LAN port.
This field displays the number of transmitted packets to LAN.
This field displays the number of received packets from LAN.
This field displays the number of collisions.
This field displays the name of your router, which you configured in
Menu 1 - General Setup.
This field displays the version of the current router software.
This field displays the version of the current ISDN firmware.
This field displays the Ethernet MAC address assigned to your router.
System Maintenance