Asus H110M-C User Manual page 24

7. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
H110M-C Front panel audio connector
•
•
8. Intel H110 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
H110M-C SATA 6.0Gb/s connectors
1-16
AAFP
PIN 1
H110M-C
HD-audio-compliant
pin definition
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD Audio]. If you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD Audio]. See section Onboard Devices Configuration for
details.
SATA6G_4
H110M-C
PIN 1
Legacy AC'97
compliant definition
SATA6G_3 SATA6G_2 SATA6G_1
Chapter 1: Product introduction