Connectors; Rear Panel Connectors - Asus H110M-C User Manual

2. Chassis intrusion header (4-1 pin CHASSIS)
This header is for a chassis-mounted intrusion detection sensor or switch. Connect one
end of the chassis intrusion sensor or switch cable to this header. The chassis intrusion
sensor or switch sends a high-level signal to this header when a chassis component is
removed or replaced. The signal is then generated as a chassis intrusion event.
By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
H110M-C
H110M-C Chassis intrusion connector
1.7

Connectors

1.7.1

Rear panel connectors

1
11
1. PS/2 mouse port (green). This port is for a PS/2 mouse.
2. Serial port. This 9-pin COM port is for pointing devices or other serial devices.
3. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
4. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
ASUS H110M-C
CHASSIS
2
10
3
9
4 5 6
8 7
1-11