Table of Contents
Advertisement
IPv6 configuration
IPv6 is supported properly only in Windows Vista or higher.
Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7 or "Accessing the
menus" on page 21).
The machine supports the following IPv6 addresses for network printing and
managements.
•
Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
•
Stateless Address: Automatically configured IPv6 address by a network
router.
•
Stateful Address: IPv6 address configured by a DHCPv6 server.
•
Manual Address: Manually configured IPv6 address by a user.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
4
From the control panel
Network model only (see "Software" on page 8).
Activating IPv6
It may be necessary to press OK to navigate to lower-level menus for some
models.
1
Select
(Menu) > Network > TCP/IP (IPv6) > IPv6 Protocol on the
control panel.
2
Select On and press OK.
3
Turn the machine off and turn it on again.
When you install the printer driver, do not configure both IPv4 and IPv6. We
recommend to configure either IPv4 or IPv6.
5. Using a Network-Connected Machine
49
Advertisement
Chapters
Table of Contents
