Ipv6 Configuration - Samsung Multifunction ProXpress C267 Series User Manual

IPv6 configuration

IPv6 is supported properly only in Windows Vista or higher.
If the IPv6 network seems to not be working, set all the network setting to
the factory defaults and try again using Clear Settings:
• Select (Setup) > Machine Setup > Next > Network Setup > Clear
Settings on the touch screen.
The machine supports the following IPv6 addresses for network printing and
managements.
• Link-local Address: Self-configured local IPv6 address (Address starts with
FE80).
• Stateless Address: Automatically configured IPv6 address by a network
router.
• Stateful Address: IPv6 address configured by a DHCPv6 server.
• Manual Address: Manually configured IPv6 address by a user.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
10
From the control panel
Activating IPv6
Accessing menus may differ from model to model (see "Menu overview" on
page 31).
1 Select (Setup) > Machine Setup > Next > Network Setup > TCP/IP
(IPv6) > IPv6 Activate on the touch screen.
2 Select On to enable.
3 Turn the machine off and turn it on again.
When you install the printer driver, do not configure both IPv4 and IPv6. We
recommend to configure either IPv4 or IPv6.
DHCPv6 address configuration
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
2. Using a Network-Connected Machine
168