NETGEAR N750 User Manual page 95

N750 wireless dual band gigabit router
Hide thumbs Also See for N750:
Table of Contents

Advertisement

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Table 1. Factory Default Settings (Continued)
Feature
Local network
DHCP starting IP address
(LAN) continued
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
savings time
SNMP
Firewall
Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
Wireless
Wireless communication
SSID names
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
Operating mode
Data rate
Output power
Firewall
Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
Default Behavior
192.168.1.2
192.168.1.254
Disabled
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Enabled
• 2.4 GHz b/g/n: NETGEAR
• 5 GHz a/n: NETGEAR-5G
Disabled
Enabled
*
Auto
United States in the US; otherwise varies by region
6 until region selected
• 2.4 GHz b/g/n: Up to 145 Mbps
• 5 GHz a/n: Up to 450 Mbps
Best
Full
Disabled (bars all unsolicited requests)
Enabled (all)
Appendix A. Supplemental Information
| 95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wndr4000

Table of Contents