Appendix A Supplemental Information; Factory Settings - NETGEAR N750 User Manual

Supplemental Information
A.
This appendix provides factory default settings and technical specifications for the N750
Wireless Dual Band Gigabit Router WNDR4000.

Factory Settings

You can return the wireless router to its factory settings. Use the end of a paper clip or some
other similar object to press and hold the Restore Factory Settings
of the router for at least 7 seconds. The wireless router resets, and returns to the factory
settings. Your device returns to the factory configuration settings shown in the following
table.
Table 1. Factory Default Settings
Feature
Router login
Internet
connection
Local network
(LAN)
User login URL
User name (case-sensitive)
Login password (case-sensitive)
WAN MAC address
WAN MTU size
Port speed
LAN IP
Subnet mask
DHCP server
DHCP range
Time zone
Time zone Daylight Saving time
Allow a registrar to configure this
router
Default Behavior
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
Autosensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Pacific time
Disabled
Enabled
Appendix A. Supplemental Information
A
button on the bottom
| 94