NETGEAR N750 User Manual page 84

Select Advanced > Wireless Repeating Function to display the following screen:
The process is the same for the 2.4 GHz or 5 GHz wireless network.
Enable Wireless Repeating Function (2.4 GHz/5 GHz). Select the check box for the 2.4
•
GHz or 5 GHz network to use the wireless repeating function.
Wireless MAC of this router. This field displays the MAC address for your wireless
•
router for your reference. You will need to enter this MAC address in the corresponding
Wireless Repeating Function screen of the other access point you are using.
Wireless Repeater. If your wireless router is the repeater, select this check box.
•
Repeater IP Address. If your wireless router is the repeater, enter the IP address of the
•
other access point.
Disable Wireless Client Association. If your wireless router is the repeater, selecting
•
this check box means that wireless clients cannot associate with it. Only LAN client
associations are allowed.
If you are setting up a point-to-point bridge, select this check box.
-
If you want all client traffic to go through the other access point (repeater with wireless
-
client association), leave this check box cleared.
Base Station MAC Address. If your wireless router is the repeater, enter the MAC
•
address for the access point that is the base station.
84 | Chapter 7. Advanced Settings
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual