Manual Setup (Basic Settings) - NETGEAR N750 User Manual

The Setup Wizard cannot detect a Point-to-Point Tunneling Protocol
Note:
(PPTP) connection. If your ISP uses PPTP, you have to set your
Internet connection through the screen described in
(Basic Settings)

Manual Setup (Basic Settings)

The Basic Settings screen displays when you select No. I want to configure the router myself
in the Setup Wizard and is also available from the wireless router menu. It is where you view
or change ISP information. The fields that display vary depending on whether or not your
Internet connection requires a login.
Check that the country is set as described
Note:
before proceeding with the manual setup.
Select Set Up > Basic Settings, and select Yes or No depending on whether or not
1.
your ISP requires a login.
shows both forms of the Basic Settings screen.
login
Yes. Select the encapsulation method and enter the login name. If you want to
•
change the login time-out, enter a new value in minutes.
No. Enter the account and domain names, as needed.
•
Enter the settings for the IP address and DNS server. The default DSL settings usually work
2.
fine. If you have problems with your connection, check the DSL settings, and see
Unsuccessful Internet Connection
If no login is required, you can specify the MAC Address setting.
3.
Click Apply to save your settings.
4.
20 | Chapter 2. Set Up Your Internet Connection
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
on page 20.
Figure 2, Basic Settings screen without (left) and with (right)
on page 23 for more information.
Manual Setup
on page 19
Setup Wizard