Replacing Hepa Exhaust Filter - Panasonic mc-ul592 Service Manual

REPLACING HEPA EXHAUST FILTER

HEPA
Exhaust Filter
HEPA
Exhaust Filter
The HEPA exhaust filter removes dirt from exhaust air.
Buckle
Check HEPA exhaust filter after emptying dust bin.
Replace when dirty.
Lay down the vacuum cleaner as shown.
To remove filter cover, slide upwards the buckle as shown.
By holding the filter cover as shown, pull it out towards you.
Filter Cover
Grasp the HEPA exhaust filter and pull out to remove it.
To install back the HEPA exhaust filter, put it into its original position.
Place the filter cover to the body as shown and press into its original location.
Filter Cover
Slide down the buckle as shown.
Do not operate vacuum cleaner with a clogged exhaust filter or
without the exhaust filter cover properly installed.
Important:
If HEPA Exhaust Filter become too dirty, it causes that air suction fall down.
HEPA Exhaust Filter cannot be cleaned and should be replaced at least
once a year.
WARNING
5