Configuring The Bridge For Your Wireless Network - NETGEAR ME101 User Manual

Configuring the Bridge for Your Wireless Network

Once you are logged into the Configuration Utility, you can view the status of your home
wireless network and current configuration of the bridge, change the password, enable WEP
security (if you have it set up on your wireless network), select a specific network for the
wireless connection or make other configuration changes.
1. Choose Programs>NETGEAR ME101 Bridge>ME101 Configuration Utility from the
Start menu.
2. If the bridge's name doesn't appear in the Bridge Name list, select Browse to have the
utility search for an active bridge.
3. Type password as the password.
4. Click Login.
5. Click the Configuration tab.
6. Either select an SSID name assigned to the wireless
router or access point from the list or type the SSID
name.
Note: If you have NETGEAR wireless devices, the
default SSID is Wireless or NETGEAR.
7. If you are not in the United States, select the correct
country or region from the Country/Region list. Click
Yes to accept the new country or region.
Having the bridge set to the wrong country
or region may result in the violation of local laws.
8. Type the correct IP address for the bridge. The first
three sets of numbers (xxx.xxx.xxx.yyy) should be the
same as your access point or router. The last set of numbers (.yyy) should be a unique set
of numbers on your network.
9. Click Apply.
10. If you are through making changes, click Exit.
11. To use the bridge with a different computer or other Ethernet-enabled device, return to
Installing the ME101 on page 4 to connect the bridge.
8