Declaration Of Conformity - Bosch PLR 30 C Original Instructions Manual

OBJ_BUCH-2312-002.book Page 25 Tuesday, November 11, 2014 12:50 PM
Digital Laser Measure
Automatic switch-off after approx.
– Laser
– Measuring tool (without measure-
ment)
Weight according to
EPTA-Procedure 01/2003
Dimensions
Batteries
Battery life, approximately
– Individual measurements
– Continuous measurement
Data transmission
Bluetooth®
A) At 25 °C operating temperature
B) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on
model and operating system. Bluetooth® devices must support the SPP profile.
C) Bluetooth® deactivated
The measuring tool can be clearly identified with the serial number 11 on the type plate.

Declaration of Conformity

We declare under our sole responsibility that the product described under "Technical
Data" complies with all applicable provisions of the directives 1999/5/EC and
2011/65/EU including their amendments and is in conformity with the following
standards: EN 61010-1: 2010-10, EN 60825-1: 2014-08,
EN 300 328 V1.8.1: 2012-06, EN 301 489-1 V1.8.1: 2008-04,
EN 301 489-1 V1.9.2: 2011-09, EN 301 489-17 V2.2.1: 2012-09,
EN 62479: 2010-09.
Technical documents at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Bosch Power Tools
PLR 30 C
20 s
5 min
0.084 kg
100 x 42 x 22 mm
2 x 1.5 V LR03 (AAA) 2 x 1.5 V LR03 (AAA)
A) C)
10000
A) C)
2.5 h
Bluetooth® 4.0 (Clas- Bluetooth® 4.0 (Clas-
B)
sic and Low Energy) sic and Low Energy)
2 609 141 213 | (11.11.14)
English | 25
PLR 40 C
20 s
5 min
0.084 kg
100 x 42 x 22 mm
A) C)
10000
A) C)
2.5 h
B)