Synchronizing A Tablet And Keyboard (Select Products Only) - HP Stream 11 Pro G2 Maintenance And Service Manual

Hide thumbs Also See for Stream 11 Pro G2:
Table of Contents

Advertisement

4.
Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5.
Complete the installation by following the on-screen instructions.
NOTE:
After a message on the screen reports a successful installation, you can delete the downloaded file
from your hard drive.

Synchronizing a tablet and keyboard (select products only)

For a tablet with a detachable keyboard, when you attach the tablet to the keyboard and restart the
computer, Setup Utility (BIOS) checks to see if the Embedded Controller firmware on the keyboard needs to
be synchronized. If so, synchronization begins. If the synchronization is interrupted, a notification screen
displays for 10 seconds before the tablet restarts and attempts to synchronize again.
NOTE:
The Embedded Controller firmware will synchronize ONLY if the tablet or keyboard battery is more
than 50% charged, or if your tablet is connected to AC power.
62
Chapter 6 Using Setup Utility (BIOS)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stream 11 pro g3Stream

Table of Contents